EdgeLock™ SE050: Plug & Trust Secure Element

There is extensive documentation online about the EdgeLock™ SE050 Secure Element so we won’t duplicate it here; however for reference we recommend the following reads:

Data Sheet: SE050 Plug & Trust Secure Element

Application Notes: User Guidelines, SE050 APDU Specification, Ease ISA/IEC 62443 compliance with EdgeLock

User Manuals: NXP SE05x T=1 Over I2C Specification

The EdgeLock™ SE050 follows the Global Platform Card Specification. So on top of the previously suggested product documentation we also advise to get some awareness of the specification by reading the following documents:

Global Platform Specifications: Card Specification 2.3.1, Secure Channel Protocol 03

NXP SE050 Plug & Trust MW

NXP provides a software stack to support this device in a number of environments: the SE050 Plug&Trust Middleware. As of version 2.14 those would be.

  • Linux: iMX6UL, iMX8Mq
  • FreeRTOS/baremetal: K64F, iMX RT 1050, LPC55S
  • Android: Hikey960
  • Raspian Linux: Raspberry-Pi-3
  • Windows

There is also extensive documentation in the form of PDF and HTML browsable documents within the freely downloadable NXP SE050 Plug & Trust MW software package We recommend users to download and succinctly read them to better understand what the product has to offer.

NXP SE050 Plug & Trust TEE Integration

At Foundries.io we believe in securing systems by extending the perimeter of the hardware root of trust to as many operational phases as possible: secure monitoring, secure authentication, storage protection, secure communication and key management.

Because a number of our customers have been targeting the NXP SE050 in their designs, we chose to integrate the NXP middleware with our ROT by bringing it under the umbrella of our Trusted Execution Environment: OP-TEE.

The SE050 middleware is a behemoth of a software stack: highly configurable, highly flexible and therefore sometimes difficult to navigate. And derived from its flexibility comes its complexity and size - well over half a million lines of code.

Fortunately, most of the functionality provided by the TEE overlaps with that provided by the SE050; in particular all cryptographic operations have a software mirror implementation in OP-TEE: ECC, RSA, MAC, HASH, AES, 3DES and so forth.

This meant that we could validate our integration using the OP-TEE crypto regression test suite from the OP-TEE sanity tests

The main advantage of using the SE050 in a product design which already runs a TEE is that all private keys programmed in the device’s non volatile memory will never be leaked to the outside world.

The SE050 also provides a real random number generator which can be exported to the REE to improve its entropy requirements.

Because the TEE is its only client, the TEE SE050 stack only requires a single global session and key store. Policies are configured so only the SCP03 enabled session can access its objects for creation or deletion.

OP-TEE Integration

The SE050 standard physical interface is I2C typically configured as a slave running in high speed mode (3.4Mbps). Since the SE050 could replace all the OP-TEE default crypto operations (software), we chose to implement a native I2C driver so the SE050 could be accessed as early as possible.

OP-TEE’s cryptographic providers are not runtime configurable meaning that the user must choose at compile time where to execute its cryptographic functions: whether in libmbedtls, in libtomcrypt or now in the SE050. But this is not an all or nothing configuration and operations can be routed to one service or another; for instance on an iMX platform the Hardware Unique Key could be retrieved from the CAAM, AES ECB and HASH operations implemented in libtomcrypt, and RNG, ECC and RSA in the SE050.

Note

As a typical scenario, choosing to run AES ECB and HASH on the SE050 might be a bad idea due to its performance implications as those operations are heavily used to verify the trusted filesystem in OP-TEE and would dramatically slow down the opening of trusted applications.

Serial Communications to the SE050

The first step taken during the integration work was to develop and upstream a native I2C driver (imx_i2c). But since this driver could not be used once the REE started executing - as it would not protect against I2C bus collisions or power management implementations controlled from the REE - we needed a second driver: a sort of i2c trampoline service capable to routing I2C read and write operations from OP-TEE to the REE driver (Linux in particular).

Note

These drivers are configurable using the following build options:

CFG_CORE_SE05X_I2C_BUS=: the I2C bus where the SE050 sits
CFG_CORE_SE05X_BAUDRATE=: the SE050 baud-rate in mbps

Secure Communication Protocol 03

The SE050 has native support for Global Platform Secure Communication Protocol 03 which allows us to protect the integrity of end to end communications between the processor and the SE050. All data sent to the SE050 is software encrypted and all data received decrypted in the TEE using a set of predefined keys shipped with the devices.

These keys can be securely rotated. Once rotated, they are stored in the TEE secure file system.

Note

We can choose whether to enable SCP03 right after boot with its default set of keys or at a later time once the RPMB-FS (or REE-FS) are available so the keys can be read from secure storage:

CFG_CORE_SE05X_SCP03_EARLY=y : enables SCP03 with its default keys set
CFG_CORE_SE05X_SCP03_PROVISION=y: allows SCP03 rotation set

Provisioning of new SCP03 keys is only available if CFG_CORE_SE05X_SCP03_EARLY is not set as we would not be able to write back the new keys to secure storage.

To trigger SCP03 key rotation you need to execute the host side of the following Pseudo Trusted Application from the REE: scp03

Warning

If the secure database storing the SCP03 keys gets corrupted, the processor will no longer be able to access the SE050 over an encrypted connection. Moreover there is no protocol defined to recover from that situation.

SE050 Non Volatile Memory

The current implementation of the SE050 TEE driver only allows for permanent storage of the ECC and RSA keys. These keys can be managed using the cryptoki API implementing the pkcs#11 standard. External keys used by the SE050 to perform other cryptographic operations are not stored in the SE050 NVM.

Note

The SE050 NVM can be cleared by setting the following configuration option:

CFG_CORE_SE05X_INIT_NVM=y

Be aware that initializing the NVM would cause all keys and objects to be deleted from permanent storage. This however has no impact on the SCP03 set of keys.